Again, forbidden in for-blocks.
fftY = <YES | NO>
! to get delay functions instead of spectra for special purposes
digitizationCorrectionY = <YES | NO>
! suppress digitizatin correction for higher output rate
statisticsCorrectionY = <YES | NO>
! apply correction for non-ideal digitizer levels
smoothing = <NONE | HANNING>
tsysCorrectionY = <YES | NO>
! apply correction derived from calibration hardware
scaleXY = <arbitrary number to multiply output by>
corrphasecalibY = <OFF | AUTO | CALIB | POWER | WVR>
! Apply phase calibration after correlation instead of to 2nd LO
postintegrationY = <number of LTA integrations to be averaged before
archiveing>
! Only useful if corrphasecalibY is not OFF
archivebothY = <YES | NO>
! Only useful if postintegration is specified